Foma SA702i Manual Download Page 150

Page: 150 / 451

ew di

ce
iv

ttin
g

View dialed/received

View dialed/received

Setting display of Redial or Received calls

You can set whether or not to display Redial, Received calls, or Received/Sent
addresses.

Press

Enter the terminal security code and press

Press

"Redial/Sent adrs" or

"Received calls/adrs".

Press

"ON".

・

Press

"OFF" not to display.

Secret mode

Secret mode

Displaying information set as Secret

Phonebook, Schedule, and ToDo set as Secret can only be displayed under Secret mode.

Press

"ON".

・

Press

"OFF" to release. No further operation is needed.

Enter the terminal security code and press

Secret mode is set to ON, and

appears on the screen.

Information

●

Secret mode is released when powering FOMA terminal off.

Accept calls from specified phone number

Accept calls from specified phone number

Receiving only calls from specified phone numbers

You can accept calls only from the specified phone numbers registered in FOMA
terminal phonebook.

・

This function is valid to calls from callers notifying Caller ID. It is recommended to set
"CallerID request service" together with this function.

・

It cannot be set together with Reject call from specified phone number.

Default

Redial/Sent adrs

: ON

Received calls/adrs : ON

Default

OFF

Summary of Contents for SA702i




































































































































































































































































































































































































































































Search results

Summary of Contents for SA702i

Reviews:

Foma SA702i, Manual, Page: 150 / 451

Search results

Summary of Contents for SA702i

Reviews: