Undercounter Dispenser and Ice machine 7UC100A/7UD100A 9
Maintenance/Cleaning Mode –––––––––––––––––––––––––––––––––––––––––
Cleaning Mode (Dispensing Disabled) - Use when cleaning surface
Entering Cleaning Mode disables the User Interface and allows you to clean
the outside of the dispenser without accidentally dispensing water or ice .
1 . To enter Cleaning Mode, press and immediately release the
maintenance/clean switch
(Fig . 5 .1) so that only "FRESH
FILTERED ICE AND WATER" displays in the user interface
(Fig . 5 .2) .
2 . To exit Cleaning Mode, press and immediately release the
maintenance/clean switch so that the ice and water icons also
display in the user interface .
Maintenance Mode (All Operation Disabled) - Use when cleaning ice
machine
Entering Maintenance Mode disables all operations and allows you to safely
clean and/or sanitize the ice machine and dispenser .
1 . To enter Maintenance Mode, press and hold the maintenance/clean
switch
(Fig . 5 .3) until
displays in the user interface
(Fig . 5 .4) .
2 . To exit Maintenance Mode, press and hold the maintenance/clean
switch until
no longer displays in the user interface .
Note: Entering and exiting Maintenance Mode will reset the six-month
periodic maintenance reminder .
Fig . 5
4
3
2
1
Accessing Internal Components ––––––––––––––––––––––––––––––––––––––
CAUTION!
Except for routine cleaning and sanitizing, only qualified
technicians should attempt to service or maintain this equipment.
1 . Press and hold the maintenance/clean switch (Fig . 5 .1) until
displays in the user interface
(Fig . 5 .2) .
2 . Remove (unscrew) chrome ice dispenser chute (Fig . 6 .1) .
3 . Remove the drip tray (Fig . 6 .2) .
4 . Remove the two screws (Fig . 6 .3) on the front panel (behind the
drip tray) .
5 . Remove and set aside the front panel (Fig . 6 .4) - do not
disengage the plug on the back of the User Interface or the
tubing at the water dispenser chute (if so equipped) .
Fig . 6
1
2
3
4
