Foerster TAK5-CH1-25, Instruction Manual

Page: 81 / 226

Device data 81
Machine stop means that the automatic feeder switches off
when the milk tank is empty.
1. > device data > milk values
2. In continue with MP resp. machine stop, select the desired
setting.
5.7.3 Entering the dry matter
This value corresponds to the dry matter contents of whole milk.
Generally the dry matter of whole milk is 120 g/L to 135 g/L.
The dry matter is automatically compared with the concentration
plan each day anew. If the feed concentration is above the dry
matter contents of the milk, milk powder will be dispensed into
the mixer jar until the target concentration is achieved. If the con-
centration is below the dry matter contents of the milk, the milk
or the milk/MP mixture is diluted with water.
1. > device data > milk values
2. Enter the desired value in dry matter .
5.7.4 Activating milk expelling
When the automatic feeder operates in the MP/milk mode , a
warm milk portion is always ready for demand in the stainless
steel coil of the heat exchanger. This milk can be replaced by a
milk values
MP/milk mode
[continue with MP]
dry matter: 135 g/L
Note: As soon as the milk tank is empty, the heat ex-
changer cleaning program will start running thus clean-
ing the heat exchanger.
Default value: 135 g
Allowed range: 5 g to 255 g
milk values
MP/milk mode
continue with MP
[dry matter]: 135 g/L