Foerster TAK5-CH1-25, Instruction Manual

Page: 77 / 226

Device data 77
5.5.1.4 Maximum speed
The maximum speed of the pump must only be changed if the
pump output is too high or too low.
1. > device data > F-station > max. speed
2. In max. speed enter the desired percentage. This value re-
fers to the maximum number of revolutions, which can be
achieved with this pump.
5.5.2 Concentrate stations
The automatic feeder provides the opportunity to dispense two
different concentrate types according to two different plans.
1. > device data > pump parameter > feed
2. Select the desired concentrate station.
3. In C-type select the desired concentrate type.
5.5.3 Teat slider
Here you can enter after which time the teat slider must be
opened or closed.
5.5.4 CalfProtect
If an entitled animal enters a feeding station which is equipped
with CalfProtect, the grating gate closes as soon as the animal
<station 1>
...
max. speed: [70]%
Note : The maximum speed of the peristaltic pumps in
the parallel mode is determined via the maximum speed
plan (see 8.3.5 Changing the plan for maximum speed,
page 122 ).
<C-station 1>
C-type: [1]
teat slider
close after: [2]min
open after: 2 min
Teat slider: open close
Default value: 2 min 2 min
Allowed range: 0 to 9 min 0 to 9 min
CalfProtect
open after: [10]min