![Foerster TAK5-CH1-25 Instruction Manual Download Page 62](http://html1.mh-extra.com/html/foerster/tak5-ch1-25/tak5-ch1-25_instruction-manual_2314657062.webp)
62
Setup
4.8.1
Feed control
4.8.1.1 Internal stations controlled by the automatic feeder
The Compact is designed for connection of max. two feeding
stations. The two internal controls required for that are part of the
standard equipment of the automatic feeder.
With the Vario both internal controls are also available and
useable. In addion, further stations can be controlled as so-
called IFS-stations (see
Select the internal control to be allocated.
Allocation
In
allocation
select the feeding station which is to be allocated
to the internal control.
Options
In
options
select whether a gradient or servo control is con-
nected.
Teat slider
If the station is equipped with a teat slider, select
teat slider
closed
resp.
open
.
Closed
means that the teat slider remains
closed until an entitled animal enters the feeding station. If the
animal has no feed entitlement anymore, the teat slider will close
again.
Open
means that the teat slider remains open until a non-
entitled animal enters the feeding station. After an entitled animal
has entered the station and consumed its feed, the teat slider will
close and open again when an entitled animal enters the station
resp. opening time has lapsed.
F-stations
internal (device)
IFS-F single
IFS-F quadruple
<internal 1>
allocation: [station 1]
options: none
teat slider: no
Summary of Contents for TAK5-CH1-25
