Foerster TAK5-CH1-25, Instruction Manual, Page: 31 / 226

Operation 31
First function
If you want to go back to the automatic mode after having car-
ried out program settings in the offline-mode, press until
automatic mode start? is displayed. Then, press . The
diode below Auto starts glowing, thus signalling the automatic
mode.
Second function
Press to access the one higher level of the menu tree.
Likewise you can reaccess the overview menu of the automatic
mode when the warnings are displayed.
Third function
Press to break off processes, such as e.g. the calibration
of powder or liquid feed components.
2.3 Operating modi
The automatic feeder knows two operating modi: the automatic
mode and the offline-mode . In the automatic mode, the animals
are fed. The offline-mode is used to carry out actions which can-
not take place in the continuous operation, such as e.g. the cal-
ibration of feed components or the functional test of motors or
sensors.
2.3.1 Automatic mode
In the automatic mode you can move at any time to the menus
of the keys and to check or change the settings/data.
Meanwhile the automatic mode is not broken off.
The automatic feeder is operating in the automatic mode
when the diode below Auto is glowing .
Auto