Foerster TAK5-CH1-25, Instruction Manual

Page: 182 / 226

182 Failures and warnings
12.2 Warnings
12.2.1 Identification
If the identification system does not work, the message on the
right is displayed:
> Check the identification.
> Check the cables leading to the antenna for visible damages.
> Check whether in Setup the (correct) antenna is activated.
The warning is automatically deleted as soon as the fault has
been removed.
12.2.2 Incorrect ID
All CAN-nodes have a unique and unchangeable ID. The ID is
used to automatically check whether the correct node responds
to the CAN-address. If this is not the case, the automatic feeder
is indeed able to communicate with the CAN-node but the data
will not be transferred correctly.
> Check all CAN-addresses.
Exclusively for service personnel
> Update all CAN-nodes, if necessary, as for compatibility rea-
sons the IDs may have been changed.
12.2.3 Double address
If two or more automatic feeders are networked within the bus
system, it may happen that an address is assigned twice.
1. In double address press .
2. The display on the right shows you the CAN-node (IFS) and
its default CAN-address, which is available twice in the bus
system.
3. Move to the setup and check the addresses of all CAN-nodes
for double allocation.
warning
identification
<identification>
no connection
warning
incorrect ID
<periph. device>
ID: #####
warning
double address
<IFS-F1>
address [41]
delete warning?