Foerster TAK5-CH1-25, Instruction Manual

Page: 145 / 226

Cleaning 145
11.When circuit cleaning has been completed, the message on
the right will be displayed. Remove the suction hoses from the
cleaning adaptor. Reconnect the milk hose to the automatic
feeder and the milk tank and slip the suction hoses on the
hose nozzles of the teat. Confirm the message with .
12.Now you can reactivate the automatic mode of the automatic
feeder.
9.5 Air (pulsating compressed air cleaning)
Compressed air cleaning allows you to clean the suction hoses
up to the top of the teat without need of using detergent. To
achieve efficient cleaning, the air pressure must be between 2
and 2.5 bar. The compressed air should be supplied by an oil-
free compressor with a capacity of 100 liters per minute and
which is equipped with a pressure reducer.
Compressed-air cleaning (hereinafter called air cleaning) can be
started automatically or manually.
1. > cleaning > air
2. In start after enter the time that should elapse after the last
portion has been dispensed before air cleaning starts run-
ning automatically .
3. If you want to manually start air cleaning, in F-station press
. Select the feeding station .
4. In mode select the intensity of air cleaning.
5. In start press .
hoses
connected?
Caution : If the air pressure is more than 2.5 bar, the dia-
phragm of the milk solenoid valves may be damaged.
air cleaning
start after: [ 30]min
F-station
<station 1>
start?
mode: [ medium ]
air cleaning
start after: [ 30]min
F-station