Foerster TAK5-CH1-25, Instruction Manual

Page: 131 / 226

Feeding 131
8.5.2 Creating the electrolyte prescription plan
You can create one electrolyte prescription plan.
1. > feeding > additive > electrolyte prescr.
2. Enter the electrolyte quantity (concentration).
3. Enter the duration of the electrolyte dispense.
4. Enter the amount of electrolyte feed per animal and meal.
5. Enter the amount of feed the animal is allowed to consume
per meal. The maximum feed quantity an animal is allowed to
consume is limited by the feeding plan.
6. In wait. time you can enter how long the animal has to wait
until it is allowed to claim feed after electrolyte or viceversa.
The waiting time is also valid if the animal receives solely
electrolyte (feed = 0.0 L).
7. Select the dispenser .
8.5.3 Programming additive dispense
After you have created the prescription plan, you can allocate it
to individual animals or a group and then activate it. You can also
allocate several prescription plans to a dispenser, thus allowing
flexible additive dosage according to plan.
additive
...
medicine prescr.
electrolyte prescr.
electrolyte prescr.
qty: [ 30]g/L
duration: 2 days
EL: 1.5 L
feed: 2.0 L
wait. time: 02:00
dispenser: 2
Note: The animals receive electrolyte and feed by turns.
If you enter 0 L in feed, the animal will receive solely
electrolyte feed.
Note: If two dispensers are connected, two different
medicines or an electrolyte and a medicine can be given
to an animal or a group at the same time.