Saffire PRO 26 i/o
User Guide
5
Front Panel Features
The front panel features level controls for all 8 analogue inputs (inserted at rear or on front panel), as well as a level control
for the Monitors (signal sent to Outputs 1 and 2) and both Headphones. Each analogue input has a High Pass Filter for removing
low frequencies (proximity effect or rumble from microphone recording). ‘Super’ channels 1 and 2 also have buttons for lowering
the impedance (to account for different microphone specification) and to reverse the phase (to eliminate phase cancellation when
recording with a stereo pair).
In addition, on the front panel there are 8 1/4” TRS (balanced) jack inputs for recording line-level signals (Inputs 1-8). These
automatically override the XLR inputs on the rear panel if both sets are connected. If you wish to record a guitar, inputs 1 and 2 can
be used to route a signal directly from the instrument (DI) to the sequencer. Instrument select buttons are included for these inputs
to allow matching of gain and impedance.
1.
8 1/4” jack line/instrument inputs
2.
Instrument select button
3.
Overload LED
4.
Input gain control
5.
Monitor level control
6.
Headphones level controls
7.
Monitor mute button/Standalone button 1
8.
Monitor dim button/Standalone button 2
9.
High-pass filter button
10. Low Impedance button
11. Phase reverse button
12. Phantom power LEDs
1
2
3
4
5
6
7
8
9
10
11
12
Summary of Contents for Saffire Pro 26 I/O
Page 1: ...User Guide FA0110 01 E OE ...
