Focus Shimano STEPS E8000 User Manual Download Page 69

Original User Guide | Pedelec Shimano Steps E8000 Version 1  

 

  US-69

11. 

Service intervals

To ensure continued enjoyment of your bike, 
please adhere to the service intervals. 
This is also important for the following reasons:

•   Regular checks are worth it for the sake of 

your own safety.

•   Higher resale value, because the bike had 

been regularly serviced.

•  Regular servicing saves you major repairs.
•  Less likely to break down.
•  Longer life.
•   Peace of mind that your bike is safe and 

comfortable.

Please note that this service is 
not free of charge, as these are 
normal service intervals.

Service interval 1
After no more than 62 miles or six weeks 
after the purchase date.

 Screws tightened
 Wheel bearings checked and adjusted
 Bottom bracket checked
 Wheel checked and centered
 Brakes checked and adjusted
 Gears checked and adjusted
 Chain checked
 Handlebar unit checked
 Headset checked and adjusted
 Tires checked
 Test ride completed

Parts replaced:    

Service interval 2
After no more than 310 miles or  
6 months.

  Screws tightened
  Wheel bearings checked and adjusted
  Bottom bracket checked
  Wheel checked and centered
  Brakes checked and adjusted
  Brake pads checked for wear
  Brakes tested
  Rim wear indicator checked
  Gears checked and adjusted
  Chain checked
  Handlebar unit checked
  Headset checked and adjusted
  Tires checked
  Safety components checked and  

 

changed, if necessary

  Test ride completed
  Software version

Parts replaced:    

Date 

 

Stamp and signature of the dealer

Date 

 

Stamp and signature of the dealer

Summary of Contents for Shimano STEPS E8000













































































Reviews: