US-62
Original User Guide | Pedelec Shimano Steps E8000 Version 1
9.
Fault
9.1
Codes
9.1.1 Warning codes
Display of a warning code
Warning codes appear in the top centre of the
display. They disappear when the problem has
been resolved. Follow the solution listed in
the table in order to resolve the problem.
Warning code
Description
Cause
Remedy
W010
Pedal assistance may be lower
than normal.
Motor is too hot.
Ride without assistance until the motor cools off. If the warning code reappears, contact your
dealer.
W011
No riding speed is displayed.
The switch-off speed is maybe
lower than normal.
Check whether the speed sensor is installed correctly. If the warning code reappears, contact your
dealer.
W013
Pedal assistance may be lower
than normal.
The torque sensor is possibly
not fully initialised.
Replace the support switch in the gear shift or only switch on one support switch and then switch
the system on again. If the warning code reappears, contact your dealer.
W032
The pedal assistance provided
in [GO] mode is maybe lower
than normal.
An electrical gear shift is
maybe installed instead of a
mechanical gear shift.
Reinstall the derailleur for which the system was designed. If the warning message reappears,
contact your dealer.