US-6
Original User Guide | Pedelec Shimano Steps E8000 Version 1
I.II
The Pedelec Shimano Steps E8000
Your Pedelec Shimano Steps E8000 is an Electrically Power Assisted
Cycle (EPAC). When the assist mode is switched on, the electric motor
provides assistance as long as you are pedaling. You can control the
degree of assistance, which is adjusted using various assist modes
5.4
Changing assist mode, Page US-40
. The assistance is dependent on the force
and speed of your pedaling and the speed you are traveling. The motor
assistance stops as soon as you stop pedaling, turn off the assistance or
when the battery is discharged or if you reach a speed of 20 mph. Speeds
greater than 20 mph may be achieved by pedaling faster.
II.
Component guides
In the component guides you will find important information about the use
and maintenance of components of your pedelec. They also often contain
information about any warranties. If there is no specific user guide
included for the particular component you are interested in, look on the
manufacturer's website. You will find a list of our
component manufacturers at http://www.derby-cycle.com
/en/downloads/downloads.html
I.I
Explanation of the safety information symbols
WARNING
This symbol
combined with the signal word "WARNING" indicates
a potentially dangerous situation. Failure to comply with this safety
warning could result in death or serious injury.
CAUTION
This symbol
combined with the signal word "CAUTION" indicates
a potentially dangerous situation. Failure to comply with this safety
instruction can result in minor or moderate injuries.
NOTICE
The signal word "NOTICE" indicates a potential situation that
may cause product or component damage. Failure to comply with
this safety instruction can result in damage to the pedelec and its
components.
This symbol indicates helpful tips, useful or important
information about the product or its additional uses. It does
not indicate hazard or a dangerous or harmful situation.