manualshive.com logo in svg

Focus Shimano STEPS E8000, User Manual, Page: 33 / 76

Share
Download
Focus Shimano STEPS E8000 User Manual Download Page 33

Original User Guide | Pedelec Shimano Steps E8000 Version 1  

 

  US-33

Replacing a wheel

1.   Apply a thin layer of grease to the 

quick-release axle.

2.    Push the wheel into the front forks 

and align with the axle holes.

3.   Reinsert the quick-release axle.

4.   Move the quick-release lever to the open position.

5.   Hook the quick-release lever into the slot and turn it clockwise.  

This screws the axle into the thread. Make sure that your wheel is 
correctly centered.

6.   Close the quick-release lever by turning it up 180˚.

   WARNING

Closing the quick-release lever should be so hard that you need to use 
the ball of your hand to do it. If not, it can open and loosen the wheel, 
which could result in you falling off the bike.

 

Quick-release clamps

For 6. Close quick-release lever

3.9.3  Quick-release axle

*

Removing the front wheel

1.   Switch off the pedelec.

2.    Open the quick-release lever by 

turning it down 180˚.

3.   Hook the quick-release lever into the slot and turn it anticlockwise 

until the quick-release axle protrudes from the axle hole about  
0.39 inches.

4.    Lift out the front wheel and remove the quick-release axle.

If your bike is fitted with rim brakes you must release them. 
Alternatively, you can deflate the front tire. Otherwise you 
will not be able to remove the front wheel.

5.   Remove the front wheel.

Quick-release clamps

For 2. Open quick-release lever

*depending on model

Summary of Contents for Shimano STEPS E8000













































































Reviews:

No comments