manualshive.com logo in svg

Focus Shimano STEPS E8000, User Manual, Page: 32 / 76

Share
Download
Focus Shimano STEPS E8000 User Manual Download Page 32

US-32  

  

Original User Guide | Pedelec Shimano Steps E8000 Version 1

   WARNING 

Closing the quick-release lever should be so hard that you need to use 
the ball of your hand to do it. If not, it can open and loosen the saddle, 
which could result in you falling off the bike.

 

Quick-release lever shuts too 

easily

1. Open the quick-release lever.
2.

  

Turn the adjustment nut 

clockwise.

3. Close the quick-release lever again.
4. Repeat if necessary.

Quick-release lever too stiff

1. Open the quick-release lever.
2. 

  

Turn the adjustment nut 

anticlockwise.

3. 

  

Close the quick-release lever again.

4. Repeat if necessary.

Quick-release levers cannot be closed just by simple 
turning. 

   WARNING

If you have released the rim brakes to remove the wheel, you must 
close them again, otherwise you will not be able to brake and run the 
risk of serious injury.

NOTICE

Detach all cables from the wheel (e.g. lighting cables), otherwise you 
could tear them.

If your bike is fitted with rim brakes it is sensible to release 
them before you remove the front wheel. Otherwise you may 
not be able to remove the front wheel.

4.   Remove the front wheel.

Replacing the front wheel

1.   Insert the wheel into the front fork ends. 

2.    Gently turn the adjusting nut on the 

quick-release lever in a 

clockwise 

direction. Make sure that your wheel 
is correctly centered.

3.    Close the quick-release lever by 

turning it up180˚. You will now 
usually be able to see the word 
'CLOSE' on the outside of the lever.

Quick-release clamps

Adjusting nut

For 3. Closing the quick-release lever

Summary of Contents for Shimano STEPS E8000













































































Reviews:

No comments