Original User Guide | Pedelec Shimano Steps E8000 Version 1
US-29
3.7.2 Checking for chain wear
1. Remove the pedelec battery.
2. Check chain wear with a chain wear indicator or a vernier calliper.
3. Replace the chain if it is worn.
3.7.3 Chain cleaning and maintenance
Lubricate the chain after riding in the rain. Clean
and lubricate it when you clean the wheel. Under no
circumstances use basic or acidic cleaners to remove rust.
Using cleaners of this kind can damage the chain.
1. Remove the pedelec battery.
2. Roughly brush the chain with a hand brush.
3. Then remove the old chain oil with a dry cloth.
4. You can now lubricate chain. How you lubricate the chain
depends on the product you have chosen.
5. When you have finished, turn the crank to distribute the chain oil.
3.8
Gears
WARNING
Never shift a derailleur onto the largest or the smallest sprocket if
the derailleur is not shifting smoothly. The derailleur may be out of
adjustment and the chain could jam, causing you to lose control and
fall.
If you have difficulties with shifting, the problem could be
mechanical adjustment. See your dealer.
The gears are operated by controls on the handlebars (gear lever, twist
grips, ...). The gear shift allows you to adjust the gear of your bike and the
transmission to the current situation. On a straight level stretch a higher
gear is sensible to achieve and maintain a higher speed without having to
pedal too much.
As soon as you start going uphill a lower gear is beneficial, because it is
important to be able to climb the hill with little effort. Select the gears so
that your legs are always moving at a steady pace.