FocalPoint DS-EHS01-39E, Installation & User'S Instructions, Page: 4 / 11

2021
Recess any part of the appliance into the wall, or run the supply cable under carpets
Site in a position where curtains or drapes could cover the appliance , or other soft materials could cover e.g. below a
coat rack
Site behind an opening door where mechanical impact/damage could occur
Site where the supply cable would become a trip hazard
Sit,stand or forcefully pull on the appliance
Obstruct,cover of force items into the openings
It should be noted that the appliance creates warm convected air currents. These currents move heat from the room
surroundings to, and up the wall surfaces adjacent to the heater.
Installing the heater next to these types of wall coverings or operating the heater where impurities in the air ,(such as
tobacco smoke) exist, may slightly discolour wall finishing.
If the appliance is to be secure on a dry lined or timber framed construction then the integrity and ability of the wall
to secure the appliance must be confirmed.
It is important in these circumstances that any vapour barrier and or
structural
members of the house frame are not damaged.
If you are unsure of the ability of the wall to secure the appliance and or which type of wall fixing to use, you should
take professional advice and obtain the correct fixings.
Alternatively , find a more suitable wall location.
DO NOT
1 Heater unit
3 Fixing brackets
7 Wall fixing screw
7 Wall plugs
2 Firebox screws