Focal POWER 1.800 User Manual Download Page 1

We thank you for choosing Focal amplifiers for your Car Audio system and for sharing our philosophy: 
“the Spirit of Sound”. This product offers the latest advances in Focal amplifiers. In order to obtain 
the  best  results,  we  highly  recommend  you  have  your  new  amplifier  installed  by  your  local  Focal 
distributor.  To  maximise  the  use  of  all  the  functionalities  of  your  amplifier  and  to  fully  enjoy  its 
performance levels, we recommend that you read the entire instructions in this booklet, and then 
keep it in a safe place for future reference. Any problems caused by not respecting the rules of use 
may render your guarantee null and void.

In order to validate your guarantee, please fill out and return the last page of 
this document within 10 days of purchase .

WARNING

This  symbol  denotes  important  instructions.  Non  respect  of  these  instructions  may  lead  to  serious 
injuries and even fatal injuries.

CAUTION

This symbol denotes important instructions. Non respect of these instructions may lead to injury or 
material damage

User manual

focal power AMPLIfiers

Focal-JMlab

®

 - BP 374 - 108, rue de l'Avenir - 42353 La Talaudière cedex - France - www.focal-fr.com

Tél. (+33) 04 77 43 57 00 - Fax (+33) 04 77 43 57 04

Due to constant technological advances, Focal reserves the right to modify the technical specifications without prior notice.

Contents of the packaging: 

- 1 amplifier
- 1 user’s manual
- 4 mounting screws
- Fuses
-  1 remote control (only supplied with the

FP 1.800 and FP 5.500 amplifiers)

-  5m cable for remote control (only supplied 

with the FP 1.800 and FP 5.500 amplifiers)

- 1 quality control sheet
- Allen keys

Français page 25

notice amplis focal power gb.ind1   1

notice amplis focal power gb.ind1   1

28/09/06   16:11:51

28/09/06   16:11:51

Summary of Contents for POWER 1.800





















































Reviews: