Operating Manual BKS015
26.11.2018
11
Fig. 5: View of the Operation Panel
K015003e
6.2
Basic Instructions for Operation and Parameter Setting
The web guide controller has three operation mods:
•
Operation Mode
•
Parameter Setting Mode (e.g. Dead Band)
•
Change Mode (change of Reference Position)
Parameter setting can be performed via the keys on the front panel or via a web
browser. When using the front panel, the user can toggle between these modi by
pressing the corresponding key or key combination. The Parameters are described
in chapter 7.1 “Description of Operation Parameters”). The keys have the following
functions:
Key
Key function during parameter setting
Enter
Increase or decrease the values.
Permanent pressing of the keys expedites the changing speed.
Note
To make the settings easier for the operator, there is visual help in form of LED row.
The pattern on the LED row indicates the setting range (ref. to chapter 6.7
“Description of the LED row).
6.3
Operating the Web Guiding System via the Front Panel
Key
Key function during operation
The sensor is mounted on the left side of the frame and
controls the material on the left edge or on the line, if a line
sensor is used. One sensor is necessary. The LED indicates
the left edge guiding mode.
