Function buttons on the monitor
SET button:
Touch it to set parameters. Push and hold it for 3s to erase the memory and back to sleep status.
△
button:
When in setting status, touch it to increase one. When in other status, touch it to change channel
between CH1 and CH2.
▽
button:
When in setting status, touch it to decrease one. When in other status, touch it to change channel
between CH1 and CH2. Push and hold it for 3s, change the unit of
℃
and
℉
.
START button:
Touch to start or stop barbeque processing. Push and hold it for 3s to close or open power.
* Transmitter
Function button on the transmitter
Press the button
to turn on/ off the transmitter with the indicate lamp lighted or extinguished.
Product installation
* Monitor
1. Open the battery cover and load 3pcs alkaline AAA batteries to the monitor according to the correct polarity. The orange
backlight flashes once (a short time). Then into waiting status (shows blank).
2. Place the monitor close to the transmitter.
* Transmitter
1. Open the battery cover and install 2pcs AAA alkaline batteries into the transmitter according to the correct polarity. The
first lamb flashes once (a short time).
2. Plug the probe sensor into CH1 or CH2 socket of the transmitter.
3. Touch the power button
. The ring lambs on the transmitter flash in cycle.
4. Attract the transmitter to grill metal surface magnetically.
