FMA LIMITED WARRANTY ON RADIO RECEIVER PRODUCTS
FMA, Inc. warrants this receiver to be free of manufacturing defects for the term of one year from
the date of purchase. Should any defects covered by this warranty occur, the receiver shall be
repaired or replaced with a unit of equal performance by FMA, Inc., or an authorized FMA service
station.
LIMITS AND EXCLUSIONS
This warranty may be enforced only by the original purchaser, who uses this receiver in its original
condition as purchased, in strict accordance with the Extreme 5 owner's manual. Receivers
returned for warranty service to an FMA service center will be accepted for service when shipped
post-paid, with a copy of the original sales slip or warranty registration form, to the service station
advised by FMA, Inc.
THIS WARRANTY DOES NOT APPLY TO
1.
Consequential or incidental losses resulting from the use of this receiver.
2.
Damage resulting from accident, crashes, misuse, abuse, neglect, electrical surges,
reversed polarity on connectors, lightning or other acts of God.
3.
Damage from failure to follow instructions supplied with the product.
4.
Damage occurring during shipment of the product either to the customer or from the
customer for service (claims must be presented to the carrier).
5.
Damage resulting from repair, adjustment, or any alteration to product by any one
other than an authorized FMA technician.
6.
Installation or removal charges, or damage caused by improper installation or
removal.
CALL (301) 668-
4280
FOR INFORMATION ABOUT SERVICE AND WARRANTY REPAIRS.
OWNER’S MANUAL
INTRODUCTION:
Thank you for purchasing the FMA Direct Extreme 5 FM receiver. The new Extreme
represents the sixth generation in a history of high quality radio control receivers de-
signed by FMA, Inc. The latest trend in the industry has been the move to smaller and
smaller airborne equipment. FMA pioneered these efforts with the micro 2000, Fotress
micro, Tetra, Quantum and Magnum series receivers. By incorporating the highest
level of technology available to the R/C industry, FMA engineers are committed to pro-
viding consumers with substantial size and weight reduction while at the same time
improving performance over previous designs. This philosophy is vastly different from
other manufacturers who rush to market smaller products that are not even 1991 com-
pliant, have limited range and performance, and hence experience serious problems
when used at typical R/C fields. Extreme receivers are designed with extremely narrow
bandpass and full-range capabilities. Furthermore, because they are dual conversion,
interference rejection on all fronts is unsurpassed. You may fly your Extreme 5 in
anything from park or indoor models to sport models or helicopters to IMAA legal
quarter scale aircraft with complete confidence regardless of how many pilots are in
the air simultaneously. In addition, the new microprocessor-controlled decoder pro-
vides additional digital filtering to further improve noise immunity while at the same
time reducing overall size and weight. Available in two basic models to accommodate
FM shift, the Extreme 5 supports either positive or negative FM modulation. Heavy-
duty, SMT construction on a single, glass-epoxy P.C. board along with various other
circuit improvements make the Extreme 5 design one of the most reliable we have ever
produced.
NOTE: PLEASE READ MANUAL COMPLETELY BEFORE OPERATION
SPECIFICATIONS:
SIZE:
1.67"L X 0.80"W X 0.58"H (IN HEAT SHRINK CASE)
WEIGHT:
11 gm / 0.40 OZ.
DESIGN:
DUAL CONVERSION, SUPER HETERODYNE
SPECIAL CIRCUITRY:
uP CONTROLLED DECODER
CHANNELS:
1-5
MODULATION:
FM / PPM (PULSE POSITION MODULATION)
FREQUENCY:
R/C CH 11 - 90 - U.S. LEGAL 72, 75 MHz
ULTIMATE BANDPASS: ± 8.5 KHz @ >55 dB DOWN
USABLE SENSITIVITY:
> -95 dBm
3OIP:
+12
dBm
OPERATING VOLTAGE: +3.5V TO +26V DC LIMITED ONLY BY SERVO REQUIREMENTS
LEGAL USE:
MEETS AMA GUIDELINES/FCC 1999 RADIATION REQ.
FMA, Inc.
57
13
Industry Lane
, Suite 50
Frederick, MD 21704
Sales: (800) 343-2934 -Technical: (301) 668-
4280
5 CHANNEL
FM DUAL
CONVERSION
SUB-MICRO
RECEIVER
5
E TR
EME
X