Website
6
3.2.1 Transmitter Antenna
PL18 EV transmitter has built-in dual antenna. When the transmitter starts the work, the antenna operates
automatically, without additional operations.
3.2.2 Status Indicator
The status indicator displays the transmitter's power and operating status. Please note the LED lights up in three
ATTENTION • To ensure a good signal do not cover or block the antenna.
Reset button
Reset button
The reset button is on the lower part of the transmitter as shown above. You need to tear apart the grip to find it.
To press it by using a long thin tool, such as a smaller screwdriver.
In case of the transmitter can not be powered off by pressing the two
Power Switch
es, please reset the
transmitter with the Reset button.
CAUTION • After resetting, the settings which set before resetting may be invalid.
