Flymo VISION COMPACT 330 User Manual Download Page 2

Carton Contents

IMPORTANT !

Please check the contents of the carton are correct 

BEFORE 

assembling your new Flymo product.

IF ANY PARTS ARE MISSING CONTACT:-

Husqvarna Outdoor Products Customer Service Department direct

Telephone :         0870 609 1901 

instruction

manual

spanner/scraper

tool

Safety

If not used properly this lawnmower can be dangerous!  This lawnmower can cause serious injury to
the operator and others, the warnings and safety instructions must be followed to ensure reasonable
safety and efficiency in using this lawnmower.  The operator is responsible for following the warning
and safety instructions in this manual and on the lawnmower.  Never use the mower unless the grass-
box or guards provided by the manufacturer are in the correct position.

Explanation of Symbols on the Vision Compact 

Warning

Read the user instructions carefully to
make sure you understand all the controls
and what they do.

Always keep the lawnmower on the ground
when mowing. Tilting or lifting the lawnmower
may cause stones to be thrown out

Keep bystanders away.  Do not mow whilst
people especially children or pets are in the
mowing area

Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged. Keep the cable away from the blade.

Beware of severing toes or hands.
Do not put hands or feet near a rotating
blade.

Blade continues to rotate after the
machine is switched off.
Wait until all machine components have
completely stopped before touching them.

Do not mow in the rain or leave the lawn-
mower outdoors while raining

Unwind and remove fully before use.

STOP

cutting height
spacers (1 fitted to
lawnmower & 2 in
loose parts pack

switchbox

start/stop levers

electric cable with

moulded plug

handle
knobs

nuts

bolt

washer

upper handle

lower handle

grassbox lid

grassbox

washer

bolt

pin

pin

retaining clip

retaining

clip

cable clip

Easi-Reel

cable winder

General

1. Never allow children or people unfamiliar with these

instructions to use the mower. Local regulations
may restrict the age of the operator.

2. Only use the lawnmower in the manner and for the

functions described in these instructions.

3. Never operate the lawnmower when you are tired, ill or

under the influence of alcohol, drugs or medicine.

4. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical

1. The British Standards Institute recommend the use

of a Residual Current Device (R.C.D.) with a trip-
ping current of not more than 30mA.   Even with a
R.C.D. installed 100% safety cannot be guaranteed
and safe working practice must be followed at all
times.  Check your R.C.D. every time you use it.

2. Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

Summary of Contents for VISION COMPACT 330











Reviews: