manualshive.com logo in svg

Flymo VISION COMPACT 330, User Manual, Page: 10 / 10

Share
Download
Flymo VISION COMPACT 330 User Manual Download Page 10

5119593-04

Husqvarna Outdoor Products

Aycliffe Industrial Park

NEWTON AYCLIFFE

Co.Durham  DL5 6UP

ENGLAND

Telephone - (00) 44 1325 300303  Fax - (00) 44 1325 310339

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.  

I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,

NEWTON AYCLIFFE,

Co. Durham.  DL5

6UP. Certify that the product:-
Category

........ Electric Hover 

Make

.............. Husqvarna Outdoor 

Products

Conforms to the specifications of Directive
2000/14/EEC

I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,

NEWTON AYCLIFFE,

Co. Durham.  DL5

6UP Certify that  a sample of the above
product has been tested using directive
81/1051/EEC as a guide.  The maximum A-
weighted sound pressure level recorded at
operator position under free field semi ane-
choic chamber conditions was :-

I, the undersigned M. Bowden of
Husqvarna Outdoor Products, Aycliffe
Industrial Park, 

NEWTON AYCLIFFE,

Co.

Durham.  DL5 6UP Certify that  a sample
of the above product has been tested using
ISO 5349 as a guide.  The maximum
weighted root mean square value of vibra-
tion recorded at operator’s hand position
was:-

Newton Aycliffe, 10/01/2006
M. Bowden,
Research & Development Director

EC Declaration of Conformity

Type

..................................................... VC330

VC350

VC380

Width of Cut

........................................ 33 cm

35 cm

38 cm

Speed of Rotation of Cutting Device

... 4,300 RPM 4,300 RPM 4,350 RPM

Guaranteed sound power level

........... 93 dB (A)

94 dB (A)

90 dB (A)

Measured Sound Power Level

............ 92 dB (A)

91 dB (A)

89 dB (A)

Level

.................................................... 78.8 dB (A) 78.8 dB (A) 79.1 dB (A)

Value

....................................................1.64 m/s

2

1.64 m/s

2

2.97 m/s

2

Weight

..................................................10.5 kg

10.5 kg

11 kg

Type of Cutting Device

.... Rotary Blade

Identification of Series.

.....See Product Rating Label

Conformity Assessment Procedure

....ANNEX VI

Notified Body

.................... I.T.S., Cleeve Road, Leatherhead,

Surrey. KT22 7SB  England

Other Directives:-

............. 98/37/EEC, 89/336/EEC,

73/23/EEC

& applicable standards:

-. EN61000-3-2, EN61000-3-3,

EN55014-1, EN55014-2, EN836, EN60335-1, EN60335-2-77

Summary of Contents for VISION COMPACT 330











Reviews:

No comments