background image

Fault Finding Hints

Fails to Operate
1. Is the correct Starting procedure being followed?  See ‘To

Start your Lawnmower’

2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?

Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.

Poor Grass Collection
1. Disconnect from the mains electricity supply.
2. Clean the outside of the air intakes, the discharge chute

and the underside of the deck.

3. Raise to a higher height of cut.  See Cutting Height Adjust-

ment.

4. If poor collection persists.

Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.

Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a new one.
4. If vibration persists?

Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.

Lawnmower becomes heavy to push
1. Disconnect from the mains electricity supply.
2. In long grass or uneven ground, the height of cut should be

raised to a higher position.  See Cutting Height Adjust-
ment.

3. Check that the wheels and rollers can rotate freely.
4. If problem persists?

Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.

Service Recommendations

1. We strongly recommend that your product is serviced at

least every twelve months, more often in a professional ap-
plication.

2. Always use genuine Spare Parts.
3. Prepacked spares are available from most Husqvarna UK

Ltd. stockists.

4. Your product is uniquely identified by a silver and black

product rating label

5. If you have a problem with your machine contact your local

Approved Service Centre ensuring you have full details of
your product as described on the product rating label.

6. Should it be necessary for work to be carried out by your

Service Centre, it is important to take your complete ma-
chine including cable and any extension cables used.

A network of specialist dealers can be found in your local Yel-
low Pages.
To obtain service on your product simply telephone or visit
your local Service Centre.  
Should you require service under the terms of our guarantee
the Service Centre will require proof of purchase.
All of the centres listed stock genuine Spare Parts.
NOTE: Our Service Repairers act on their own behalf and are
not empowered to commit or legally bind Husqvarna UK Ltd.
in any manner whatsoever.

If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna UK Ltd., through its
Authorised Service Repairers will effect the repair or replace-
ment to the customer free of charge providing:
(a)

The fault is reported directly to the Authorised Repairer.

(b)

Proof of purchase is provided.

(c)  The fault is not caused by misuse, neglect or faulty ad-

justment by the user.

(d)  The failure has not occurred through fair wear and tear.
(e)  The machine has not been serviced or repaired, taken

apart or tampered with by any person not authorised by
Husqvarna UK Ltd..

(f) 

The machine has not been used for hire.

(g)  The machine is owned by the original purchaser.
(h)

The machine has not been used commercially.

*

This guarantee is additional to, and in no way diminishes
the customers statutory rights.

Failures due to the following are not covered, therefore it is
important that you read the instructions contained in this Op-
erator's Manual and understand how to operate and maintain
your machine:

Failures not covered by guarantee
*

Replacing worn or damaged blades.

*

Failures as a result of not reporting an initial fault.

*

Failures as a result of sudden impact.

*

Failures as a result of not using the product in accor-
dance with the instructions and recommendations con-
tained in this Operator's Manual.

*

Machines used for hire are not covered by this guaran-
tee.

*

The following items listed are considered as wearing
parts and their life is dependent on regular maintenance
and are, therefore not normally subject to a valid war-
ranty claim: Blades, Electric Mains cable

*

Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or additional
parts that are not either manufactured or approved by
Husqvarna UK Ltd., or by the machine having been
modified in any way.

Guarantee & Guarantee Policy

Summary of Contents for Speedi-Mo









Reviews: