Guarantee and Guarantee Policy
If any part is found to be defective due to faulty
manufacture within two years of original purchase,
Electrolux Outdoor Products, through its Authorised
Service Repairers will effect the repair or replacement
to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Electrolux Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used outside of the
country for which it was specified.
(i) The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore
it is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and recommendations
contained in this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular maintenance
and are, therefore not normally subject to a valid warranty
claim: Blades, belts, cables, recoil ropes, filters.
*
Caution!
Electrolux Outdoor Products does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts or
additional parts that are not either manufactured or
approved by Electrolux Outdoor Products, or by the
machine having been modified in any way.
Environmental Information
Electrolux Outdoor Products are manufactured under an
Environmental Management System (ISO 14001)
using, where practical, components manufactured in the
most environmentally responsible manner, according to
company procedures, and with the potential for
recycling at the end of the products’ life.
•
Packaging is recyclable and plastic components have
been labelled (where practical) for categorised recycling.
•
Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
•
If necessary, contact your local authority for disposal
information.
DISPOSAL OF FUELS AND LUBRICATING OILS
• Wear protective clothing when handling any fuels and
lubricants.
• Avoid contact with skin.
• Remove petrol and engine oil before transporting the product.
• Contact your local authority for information of your
nearest Recycling/Disposal Station.
• Do NOT dispose of used fuels/oils with household waste
• Do NOT dispose of used fuels/oils to water.
• Waste fuels/oils are harmful, but can be recycled and
should be disposed of through the recognised facilities.
• Do NOT incinerate
Service Recommendations
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in
a professional application.
Fault Finding
Engine Will Not Start
1. Ensure that the Operator Presence Control is
gripped firmly to the upper handle.
2. Check that there is sufficient fuel of the correct mix in
the fuel tank, the fuel tap is open and the fuel tank
air vent screw is open.
3. Check that the choke control lever is in the correct
position:- 'normal’
(H)
- for a hot engine, 'cold start’
(G)
- for a cold engine.
4. The engine may have flooded. Remove and dry the
spark plug.
5. Petrol may be stale, replace. Once the petrol has
been replaced, it may take a little time for fresh petrol
to filter through.
6. Check that the blade bolt is tight. A loose blade bolt
could cause difficult starting.
7.
If the engine will still not start - disconnect the spark
plug lead and consult you local approved Electrolux
Outdoor Products Service Centre/Dealer.
Poor Flotation or Lack of Power
1. Disconnect the spark plug lead.
2. Clean the underside of the hood, the air filter, the
fan, around the engine and the air intakes.
3. Check that the engine choke control lever is in the
'normal' position.
(H)
4. Petrol may be stale, replace. Once the petrol has
been replaced, it may take a little time for fresh petrol
to filter through.
5.
If poor flotation or lack of power persists - disconnect
the spark plug lead and consult your local approved
Electrolux Outdoor Products Service Centre/Dealer
.
Excessive Vibration
1. Disconnect the spark plug lead.
2. Check that the blade is correctly fitted.
'See 'Fitting
and Removing the Blade and the Fan'
.
3. If the blade is damaged or worn, renew the blade.
4.
If vibration persists - do not use - disconnect the spark
plug lead and consult your local approved Electrolux
Outdoor Products Service Centre/Dealer
.
ENGLISH - 5