SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://w ww.carymart.com E-Mail: [email protected]
RF Wireless Remote Control Kit (Model 0020211
4S 1PFC-AC220+ CV-8-3)
The receiver is designed for one-transm itter-many-receivers system . You can use a 4 buttons transmitter to control 2 receivers, or use a 6
buttons transm itter to control 3 receivers , or use a 8 buttons transmitter to control 4 receivers, or use a 12 buttons transmitter to control 6
receivers.
Package Include:
4 X Receiver: S1PFC-AC220
1 X Transmitter: CV-8-3
1 X Use manual
Features:
Application: It can be used in rolling blinds, rolling doors, projection screens, aw nings, pumps, w inches, conveyors or other appliances and
equipments w ith AC motors, it can remote control AC motor rotates in the positive or reversal direction.
Wireless control, easy to install.
Waterproof: The receiver has w aterproof case and w aterproof connector, it can be installed outdoors.
You can rotate a motor in the positive or reversal direction w ith the transmitter (remote control) from any place w ithin a reliable distance.
The RF w ireless signal can pass through w alls, floors and doors.
High Pow er: Each channel can w ork at maximum current 30A.
With limit control
terminal
s: You can connect limit sw itches or sensors to stop the motor.
With
w ired control terminal
s: You can connect manual sw itches or external devices (w ith low level output signal, such as sensors) to control the
motor.
Design w ith low -pow er and high-speed CMOS technology.
You can turn on/ off the receiver w ith transmitter (remote control) from any place w ithin a reliable distance.
With reverse pow er protection and over current protection.
Reliable control: The receiver only w orks w ith the transmitter w hich use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use tw o or more units in the same place.
Receiver Parameters:
Model No: S1PFC-AC220
Control Mode: Latched or Momentary
Coding Type: Fixed code or learning code
Coding Setting: By learning
Pow er Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Working Frequency: 315MHz / 433MHz
Channel: 1 CH, can w ork w ith 1 AC motor
Static Current: ≤6mA
Maximum Working Current: 30A / each channel, so motor's
maximum starting current can not exceed 30A.
PCB Size: 140mm x 73mm x 18mm
Case Size: 192mm x 100mm x 45mm
Transmitter:
Model No.: CV-8-3
Shell Color: White
Channel/Button: 8
Button Symbol: Four
▲
, Four
▼
,
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 15mA
Encoding Chip: PT2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 500m / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 110mm x 50mm x 18mm
Working Range:
With a transmitter (such as CV-8-3) to form a complete set, the w orking distance can reach 500M in an open ground. The maximum w orking distance
500M is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it w ill be hindered by trees,
w alls or other constructions, and w ill be interfered by other w ireless signals. Therefore, the actual distance may or may not reach 500M.
Usage (with transmitter CV-8-3):
Connect live w ire to terminal
“L” and neutral w ire to terminal “N”. Then connect AC motor to terminals “UP”, “COM” and “DOWN”. You can exchange
“UP” and “DOWN” w ires of motor to change the rotating direction of motor.
