background image

FLYCAM HD HA NDHELD VIDEO STABILIZER  

 

 

 

 

 

 

             11 

 

WARRANTY 

We offer a one year warranty for our products from the date of purchase. 

We will repair or replace your product, free of charge, in the event of a defect in materials or 
craftsmanship obtained during normal use or handling based on the user manual. Please note 
that  we will  not cover any  shipping  costs for  returning the  product  to us. If any VAT or im-
port duties are applied to the return, we will also charge these costs to the customer.   

The warranty does not include, by the way of example, damage caused by products that we do 
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , 
or service by anyone other than our company.   

We are not liable for incidental or consequential damages resulting from the use of the unit or 
occurring due to any breach of this warranty.  

Replacement parts of the product will be provided at nominal cost (covering the cost price of 
the  replacement  parts  only)  to  the  customers  after  the  Warranty  Period  has expired.  We  will 
cover the complete cost  of sending replacement parts within the  warranty period. After that, 
nominal cost of the product & Actual shipping cost will be charged.  

Do  not  send  the  unit  to  us  without  first  getting a response  and  getting  the  approval  to  send 
back the item. 

In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do 
our best to help you out. 
 
For any other assistance you can reach us via email. 

Summary of Contents for FLCM-HD5-QT












Reviews: