FLY E185
Service Manual
3.4.8 FM radio circuit
AR1000 is FM receiving module. FM_ANT is used to receive the radio signal from the antenna,
FM_VCC is the 2.8Vpower supply, GPIO83_FM_32K is the reference clock, GPIO54_FM_SDA
and GPIO55_FM_SCL is control signal from the baseband CPU, FM_INR and FM_INL are the
stereo audio output.
Figure 3.4.8 FM Radio circuit
3.4.9 Camera circuit
MT6236 ISP incorporates a feature rich image signal processor to connect with a variety of image
sensor components. This processor consists of timing generated unit (TG) and lens/sensor
compensation unit and image process unit. Timing generated unit cooperates with master type
image sensor only. That means sensor should send vertical and horizontal signals to TG. TG offers
sensor required data clock and receive sensor Bayer pattern raw data by internal auto
CKT Confidential
Page 30 of 47
