Versiv Cabling Certification Product Family
Users Manual
64
Or, tap
MEASURE
to do the length and resistance tests,
which do not require a remote tester. Because the tester
cannot complete all tests, and the reflection at the end of
the cable exceeds the 15% limit for the HDTDR test, the
result for an Autotest without a remote is always
FAIL
.
Figure 25. Equipment for Tests on Coaxial Cabling
Note
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS
> Main as Remote.
GPU181.EPS
Main and remote Versiv units
with DSX CableAnalyzer
modules installed
Two DSX-CHA003 adapters
For tests on network cabling:
F-connector to BNC adapters
and patch cords (typically 50
)
For tests on video cabling:
F-connector adapters and patch
cords (typically 75
)
AC adapters with line cords
(optional)
A
C
B
D
E
Summary of Contents for Versiv
