Fluke Versiv, User Manual

Page: 50 / 260

Versiv Cabling Certification Product Family
Users Manual
36

The percentage of the project that is completed. The
percentage is the number of IDs used for saved results divided
by the total number of used and available IDs in the project.
The number of IDs includes IDs for copper and fiber cable.
% Tested
does not show if your project contains only a
Next ID
list. See “About Next ID Sets” on page 215 for more information
about the
Next ID
list.

The type of module attached to the main Versiv unit.

This icon shows when the tester’s link interface adapter
is connected to the adapter on a Versiv remote and the
remote is turned on.
 This icon shows when the talk function is on. To use the
talk function:
1
Connect the main and remote testers together through a
link that has one or more good wire pairs.
2
Connect headsets to the headset jacks on the testers.
3
Press the button on one of the headset microphones or
press

on the remote, then speak into the
microphone.
Make Sure Your Tester is Ready to Certify
Cabling
To make sure your tester meets its accuracy specifications, follow
these guidelines:
 Keep the tester’s software current. The latest software is
available on the Fluke Networks website. See “Update the
Software” on page 233.
 Set the reference for the twisted pair adapters every 30 days.
See page 37.