Fluke Versiv, User Manual

Page: 173 / 260

Chapter 7: Use the OTDR
OTDR Port Connection Quality
159
GPU191.EPS
Figure 59. How to Use the Optional TPAK Magnetic Hanger
OTDR Port Connection Quality
When you do an OTDR test, the test shows the quality of the
OTDR port connection (Figure 60). If a test takes more than
approximately 3 seconds, the
PROGRESS
screen also shows a
preview of the OTDR trace. The trace is black for one wavelength
and blue for the other wavelength.
If the gauge is not in the Good range

Clean the OTDR port and the fiber connector. Use a video
probe to inspect the endfaces in the port and fiber connector
for scratches and other damage. If an endface on the tester
shows damage, contact Fluke Networks for service
information.