2-18
TS1200 Test Set
Users Guide
Downloading Results
To download results from the TS1200:
1
Turn on the TS1200
2
Select 4 - ADSL Config, 2 - Stored Results.
3
Use the arrow keys or the numeric keypad to select the results you would like to transfer
(1-5). Optionally, select F2 - View to view the results on your TS1200 (see Figure 2-3).
4
On the TS1200, press F1 - Send for each result you want sent. The results will be sent to the
PC.
5
If no data is seen, make sure that HyperTerminal is set up correctly. Retry downloading the
data again. If there is still no data showing in HyperTerminal, make sure that the correct
cable and RJ-11 to DB-9 serial adapter are being used.
6
When data is showing in HyperTerminal, you may print or store the results.
Summary of Contents for TS 1200
