2-5
Using ADSL Mode
bdx02.eps
Figure 2-2. Line with Both ADSL and POTS
Using ADSL Mode
The TS1200 performs either Auto or Manual ADSL tests.
In ADSL mode, the user can maintain an active POTS call.
To enter ADLS mode, press 2 on the Home Screen (the first screen displayed upon powering up
the unit) or press the POTS/ADSL key.
Note
Pressing the Home key at any screen will return you to the Home screen.
Change ADSL Mode
1
Press F2 - MODE.
2
Press either 1 - Multi-Mode
or 2 - G.LITE.
Auto Test
Auto test allows the user to take a snapshot of the ADSL line status at a
particular time. Once data is collected, the test is terminated and results are
displayed.
To start Auto test, press F1 - Auto. The screen indicates that test set is
attempting a connection.
To stop Auto test, press F2 - Discon.
-continued-
Summary of Contents for TS 1200
