TiS
Users Manual
14
Maintenance
The Imager supplies maintenance-free operation. However, some precautions
should be followed to get the best and longest Imager performance.
Cleaning the Imager
Wipe the case with a damp cloth and a mild detergent. Do not use abrasives,
isopropyl alcohol, or solvents to clean the case or lens/window.
Battery Care
To get the best performance from the Imager’s Nickel-Metal Hydride (NiMH)
battery, use the guidelines that follow.
W
Caution
To avoid damage to the Imager, do not leave the camera
exposed to a heat source or high-temperature
environments, such as an unattended vehicle in the sun.
•
Do not store the Imager on the charger for more than 24 hours as
reduced battery life may result.
•
Charge the Imager for a 2-hour minimum at least every six months to
maximize battery life. Without use, the battery will self-discharge in
approximately six months. Batteries stored for long periods may
require two to ten charging cycles before it reaches full capacity.
•
Always operate the Imager within the temperature range specified in
the specifications labeled Temperature – Operating.
~
W
Caution
Do not incinerate the Imager and/or battery. Go to Fluke’s
website for recycling information.
Summary of Contents for TiS
Page 4: ...TiS Users Manual ii...
Page 6: ...TiS Users Manual iv...
Page 24: ...TiS Users Manual 18...
