Ti32, TiR32, Ti29, TiR29, Ti27, TiR27
Users Manual
10
7.
Press the softkey labeled
Next
to move to the next time element.
8.
Press softkey labeled
Done
when finished.
9.
Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.
The 12 hour format has a selection for setting whether the time is AM or
PM.
Changing the Temperature Units
The Imager will display temperature in Fahrenheit or Celsius. To change the
temperature units:
1.
Press
until the F3 softkey label reads
Settings
.
2.
Press the softkey labeled
Settings
.
3.
Within the Settings Menu, press
, labeled
Menu
,
until the F3 softkey
reads
Units
.
4.
Press
until
Units
is displayed over
.
5.
Press the softkey labeled
Units
.
6.
Press
for Celsius or
for Fahrenheit.
7.
Press the softkey labeled
Done
to set the units.
8.
Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.
Using the Centerbox Feature
The Centerbox feature allows the user to establish a temperature measurement
zone (box), centered on the infrared image. This zone (box) expands and
contracts to different levels within the infrared image. The zone allows the user
to see an approximate maximum (MAX), average (AVG), and minimum
(MIN) temperature measurement within the selected area.
Note
When the Centerbox feature is enabled, and the Spot Temp markers
are also enabled, the Spot Temp markers will only work within the
selected Centerbox area, instead of the full infrared field of view.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
