Fluke Ti27, User Manual

Page: 15 / 42

Thermal Imagers
Using the Menu
9
Setting the Date
To set the date:
1. Press

until the F3 softkey label reads Settings .
2. Press the softkey labeled Settings .
3. Within the Settings Menu, press

, labeled Menu , until the F1 softkey
reads Date .
4. Press the softkey labeled Date .
The date can be displayed in one of two formats: MM/DD/YY or
DD/MM/YY .
5. Press the softkey labeled with the preferred date format.
6. Press the softkey labeled Up (

) or Down (

) to adjust the selected date
element.
7. Press the softkey labeled Next to move to the next date element.
8. Press the softkey labeled Done when finished.
9. Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.
Setting the Time
To set the time:
1. Press

until the F3 softkey label reads Settings .
2. Press the softkey labeled Settings .
3. Within the Settings Menu, press

, labeled Menu , until the F3 softkey
reads Time .
4. Press the softkey labeled Time .
The Imager will display time in two different formats: 24 hour or 12 hour.
5. Press the softkey labeled with the preferred format.
6. Press the softkey labeled Up (

) or Down (

) to adjust the selected time
element.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com