Fluke SimpliFiber, User Manual, Page: 28 / 47

S
I M P L I
F
I B E R
ENGLISH - 24
appropriate wavelength.
Note
When using a light source other than
S
IMPLI
F
IBER
Source, press the to select the
appropriate wavelength. Both units must be
set to the same wavelength.
6. Press, hold and release the button to
set and save the
new reference
value. The reference
value will be
displayed.
7. Disconnect the coupler without disturbing
the fiber connections to the units.
Measuring Loss using Method A
When Method A was used to set the reference,
proceed as follows:
1. Do not disconnect the launch cables from
the S
IMPLI
F
IBER
units.
2. Disconnect one launch cable from the
coupler.
3. Connect the fiber to be measured between
the launch cables. An extra coupler is needed.
4. S
IMPLI
F
IBER
Meter will report the loss in dB.