Configuration
IP Address
43
7
7 Configuration
7.1 IP Address
The pan tilt head is configured to provide an absolute IP address with the preset of 192.168.42.136
Configuring the IP address of the PC as belonging to the same subnet, e.g.
IP address:
192.168.42.1
Subnet mask
255.255.255.0
7.1.1 MAC address
The device MAC address is found on the label located inside the cover of the base connectors, as seen in the
figure below.
Figure 7-1: Label for the MAC Address
7.2 Web Interface
The first operation in configuring the device consists in connecting to the web interface. To operate correctly, the
pan tilt system must be configured according to the camera installed.
To access the web interface of the product, simply use a browser to connect to http:/<IP address> whereby <IP
address> stands for the IP address of the pan tilt system.
Note
Browsers supported: Microsoft Internet Explorer, Google Chrome, Mozilla Firefox.
The preset login data is:
User:
admin
Password:
admin
Note
The login data must typically be entered twice.
7.2.1 Home Page
The product control interface is displayed if login is successful. On the Home page, the operator can view the
system status, view the camera snapshot, and move the unit.
7.2.1.1 Image Stream
This space shows a preview of the thermal image stream. The resolution and its frame rate are fixed.
Summary of Contents for Pan Tilt System
