Fluke OF-500 OptiFiber, Technical Reference Handbook

Page: 211 / 282

10-1
Chapter 10
Creating Custom Fiber Types and Test Limits
Note
For loss/length tests in Smart Remote mode,
custom fiber types and test limits need to exist
only in the main tester.
Creating Custom Fiber Types
You can create up to 10 custom fiber types. Custom fiber
types are marked with asterisks (*) in the list of fiber
types and are stored in the mainframe (not the module).
1 Press
F
; then select Edit Custom Test Limit .
2 Press
C
Edit Fiber Types .
3 On the FIBER TYPE LIST screen, do one of the
following:
•
To see any fiber’s properties, select it from the
list.
Note
Selecting a factory-installed fiber type lets you
see the fiber’s properties, but you cannot edit
them.
•
To edit a custom fiber type, select it from the
list.
•
To create a new fiber type, press
A
Create
Fiber Type ; then select a wavelength.
-continued-