Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 41 / 278

Getting Acquainted
Basic Features
1-21
1
To mark a topic for quick access later press
A
Set
Bookmark when the topic you want to mark is displayed.
You can place multiple bookmarks.
To go to a bookmarked topic press
B
Go to Bookmark
while viewing help; then select the bookmark from the list.
To go back to the previous topic press
C
Back.
Overview of Memory Features
You can save results on a removable memory card or in the
tester's internal memory.
To set the location for saving tests press
S
then select
CURRENT FOLDER on the Job tab.
To check the memory status press
F
; then select
Memory Status. Press
A
to switch between the memory
card and internal memory status.
See Chapter 9 for details about the tester's memory
features.
Using the Memory Card
Figure 1-22 shows how to insert and remove a memory
card. You can use MultiMediaCard (MMC) or Secure Digital
(SD) memory cards in the tester.
W
Caution
Never remove the memory card while the
memory card’s LED is on. Doing so can corrupt the
data on the card.
Press
S
; then select CURRENT FOLDER on the Job tab to
do the following:
•
See the folders available on the memory card
•
Change the destination for saved results. Use
L
or
M
to select a folder name; then press
t
. You can save
results on the memory card or in the tester's internal
memory.
•
Create a new folder on the memory card. Press
A
New Folder. Enter a name in the NEW FOLDER NAME
box; then press
s
.
•
Delete an empty folder on the memory card. Press
B
Delete.
To format the memory card press
F
; then select Format
Memory Card.