Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 30 / 278

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
1-10
Changing the Language
To change the tester’s language, do the following:
1 Press
S
.
2 Press
N
once to select the System tab.
3 Press
L
to select LANGUAGE; then press
t
.
4 Use
ML
to select the desired language; then press
t
.
5 Restart the tester to apply the new language.
Additional languages for the tester may be available with
software updates available on the Fluke Networks website.
Use LinkWare software to install or remove languages. See
“Updating the Tester’s Software” in Chapter 11 for details.
Removing and Installing the Module
The tester’s capabilities depend on which test module is
installed. Figure 1-2 shows how to remove the module.
W
Caution
To avoid corrupting the tester's software, always
turn the tester off before removing or installing
the module.
Verifying Operation
The tester performs a basic self-test when you turn it on. If
the tester reports an error or does not turn on, refer to “If
Something Seems Wrong” in Chapter 11.
The tester shows the model number of the installed module
in the upper-right corner of the screen. If the screen shows
No Module Installed or Problem with Module or The
module needs a software update refer to “If Something
Seems Wrong” in Chapter 11.