Memory Functions
27
GUE00.EPS
Figure 11. View Record Display
(loss measurement shown)
The relative level of power or power loss measured on
the channel. For loss measurements, the limit line and
OK
or
show. See Figure 7 on page 14 and Figure 10
on page 22 for descriptions of these measurements.
The channel for the measurement shown (
). To
change the channel, press
or
(
).
POLARITY
: The polarity used for the connections
between the meter and source.
To change the channel for the measurement shown
(
), press
or
.
Use
DELETE
to delete records. See "Delete Records"
The measurement for the selected channel. To see the
measurement for the next channel, press
or
.
If the 12 records for a cable have been deleted,
shows for each channel.
The fiber number.
The record number for the measurement shown.
The wavelength for the measurement.
AUTO
shows
if the source was in auto wavelength mode during the
measurement.
H
I
Summary of Contents for MultiFiber Pro
Page 6: ...MultiFiber Pro Optical Power Meter and Fiber Test Kits Users Manual iv ...
Page 10: ...MultiFiber Pro Optical Power Meter and Fiber Test Kits Users Manual viii ...
Page 50: ...MultiFiber Pro Optical Power Meter and Fiber Test Kits Users Manual 40 ...
Page 68: ...MultiFiber Pro Optical Power Meter and Fiber Test Kits Users Manual 58 ...
