Fluke MICROSCANNER, User Manual, Page: 20 / 154

MICROSCANNER
ENGLISH - 17
Office Identifier
(MICROSCANNER PRO)
The Office Identifier function allows you to find
the termination of a twisted pair and/or a coax
cable drop from a distribution panel. By inserting
the Office Identifier adapters into wall outlets,
MICROSCANNER can identify office locations at
the distribution panel.
The Office Identifier plugs are included in the
optional Office Identifier accessory kit. They are
uniquely numbered and have RJ-45 connectors on
one end and COAX connectors on the other end to
allow identification of RJ-45 and/or COAX outlets.
1. Attach the coax adapter to the MAIN jack
(identified on the unit right above the modular
8 jack).
2. To display the Office Identifier screen, press
the MODE key until the word OFFICE is
displayed on the screen.
3. Insert the Office Identifier plugs into wall
outlets in the offices you wish to locate.
4. At the distribution panel, connect the cable to
be tested to the coax adapter and run the
Office Identifier function to identify which
office is connected to a given port.
MICROSCANNER will display the number of the
Office Identifier found.
Office 1 found No office found