MicroScanner Pro™
Toner
21
Toner
Toner
is a cable tracing function that assists in tracking
cables hidden in walls, ceilings, floors, or patch panels
by generating four distinct multi-tone signals that can
be received by a cable tracer.
To trace a cable, use any inductive probe capable of
receiving a 1000 Hz signal, such as the Fluke Networks
MicroProbe, IntelliTone Probe, or any equivalent
tracing device to convert a signal on the cable into an
audible tone. To determine the cable path, simply trace
along the wire using the audible tone as a guide.
The tracer needs to be within one foot of the hidden
cable. You may select one of four different tone
sequences, displayed as the numbers 1-4 on the LCD.
1.
To display the Toner screen, press the
MODE
key
until the words
SIGNAL and TONE
are displayed
on the screen.
2.
To select a different tone sequence, press the
or
key.
Display for time frames with #3 signal tone
aue27f.eps
To enhance the signal insert a grounding plug into the
ground jack located next to the
MAIN
and
LOOPBACK
jacks. You may use any grounding cable that has a
standard insulated phone tip plug.