The memory menu includes the soft-keys STORE SAMPLE, WRITE VALUE,
VIEW MEMORY, CLEAR MEMORY, and RUN/PAUSE.
7.3.1
Store Sample
The STORE SAMPLE soft-key places the most recent measurement in a mem-
ory location you specify. Since the measurement may be updated while you are
trying to store it in memory, you may first want to pause sampling temporarily
using the RUN/PAUSE soft-key. When you press the STORE SAMPLE
soft-key, a small window appears requesting you to enter a location number.
Enter a number between 1 and 100. The measurement displayed at the top of
the screen will be stored in memory along with its units.
7.3.2
Write Value
With WRITE VALUE you can enter any number into any memory location.
This may be useful if you want to display the differences between measure-
ments and a particular value (see Section 7.5.3). When you press this key a
small window appears that allows you to enter the memory location you want,
the value, and the units. The value will stay in memory until you overwrite it or
clear it.
7.3.3
View Memory
The VIEW MEMORY function allows you to scan the memory to view the data
it contains. This is useful for finding specific data or unused locations. When
you press the key a small window appears requesting you to enter the begin-
ning location. A larger window then appears showing the contents of that loca-
1575/1590 Thermometer Readout
User’s Guide
44
