1
DTX-MFM2/GFM2/SFM2 Fiber Modules
Overview of Features
The DTX-MFM2, DTX-GFM2, and DTX-SFM2 fiber
modules are used with a DTX Series CableAnalyzer to test
and certify fiber optic cabling installations. The fiber
modules offer the following functions and features:
•
Measures optical power loss and length on dual-
fiber cabling. The DTX-MFM2 tests multimode
cabling at 850 nm and 1300 nm. The DTX-SFM2 tests
singlemode cabling at 1310 nm and 1550 nm. The
DTX-GFM2 features a VCSEL for testing multimode
cabling at 850 nm and 1310 nm for Gigabit Ethernet
applications.
•
Each module transmits both wavelengths (850 nm
and 1300 nm, 850 nm and 1310 nm, or 1310 nm and
1550 nm).
•
Interchangeable connector adapters allow reference
and test connections that meet ISO standards for
most SFF (small form factor) fiber connectors.
•
Provides pass/fail results based on industry-standard
limits.
•
Visual fault locator helps you locate breaks, bad
splices, bends, and check fiber continuity and
polarity.
•
FindFiber
function helps you identify and verify
fiber connections.
Registration
Registering your product with Fluke Networks gives you
access to valuable information on product updates,
troubleshooting tips, and other support services. To
register, fill out the online registration form on the Fluke
Networks website at
Summary of Contents for DTX-GFM2
