![Fluke DTX-GFM2 User Manual Download Page 10](http://html1.mh-extra.com/html/fluke/dtx-gfm2/dtx-gfm2_user-manual_2309138010.webp)
DTX-MFM2/GFM2/SFM2 Fiber Modules
Users Manual
4
Safety Information
WX
Warning
To avoid possible fire, electric shock, or personal
injury read the safety information given in the
DTX Series CableAnalyzer Users Manual
.
W*
Warning: Class 1 and Class 2 Laser
Products
To avoid possible eye damage caused by
hazardous radiation:
•
Never look directly into optical connectors. Some
sources produce invisible radiation that can
permanently damage your eyes.
•
Keep the fiber module’s OUTPUT port covered
with a dust cap or keep a reference test cord
attached. The OUTPUT port may be active even
when a test is not in progress. Covering the port
reduces the risk of accidental exposure to
hazardous radiation.
•
Never start a test or activate the OUTPUT port or
VFL port without first connecting a fiber to the
port you will use.
•
Never look directly into the visual fault locator
output. Momentary exposure to the locator’s
output will not damage your eyes; however,
direct, long-term exposure is potentially
hazardous.
•
Do not use magnification to view the optical
outputs without proper filtering.
•
Use of controls, adjustments, or procedures not
stated herein might result in hazardous
radiation exposure.
Summary of Contents for DTX-GFM2
