Fluke DTX-1800, Technical Reference Handbook

Page: 55 / 398

Getting Acquainted
Overview of Memory Features
1-29
1
Enabling or Disabling the Beeper
To enable or disable the tones for key presses and testing
progress:
1 Turn the rotary switch to SETUP, use
D
to
highlight Instrument Settings; then press
H
.
2 Press
C
to go to the tab with the Audible Tone setting.
Use
D
to highlight Audible Tone; then press
H
.
3 Use
D
to highlight the setting you want; then
press
H
.
Overview of Memory Features
All DTX testers have internal memory that can store at least
250 Autotest results, including graphical data. The
maximum capacity of internal memory depends on the
space taken by the tester’s software.
The DTX-1800 and DTX-1200 testers can also store up to 500
Cat 6 Autotest results, including graphical data, on a
16 MB card. The testers can also use cards with higher
capacity and secure digital (SD) memory cards.
The card capacities supported depend on the DTX software
version. See the Fluke Networks Knowledge Base on the
Fluke Networks website for details.
Inserting and Removing the Memory Card
Insert the memory card into the slot on the side of the
tester.
Figure 1-12 shows how to insert and remove the card.
Formatting the Memory Card (DTX-1800 and DTX-
1200) or Internal Memory
Formatting erases all contents of the memory card or
internal memory.
1 To format the memory card or internal memory:
2 Turn the rotary switch to SPECIAL FUNCTIONS, then
select Memory Status.
3 For a DTX-1800 or DTX-1200 with a memory card
installed, press
J
to select the memory card or
internal memory.
4 Press
K
Format.