Fluke db PRUFTECHNIK SHAFTALIGN touch, Manual

Page: 118 / 127

tapping ( 1 ).
Causes that may influence measurement
l
Incorrect or loose mounting of bracket frame, support posts
l
Incorrect or loose mounting of sensor and reflector on the support posts
l
Loose machine anchor bolts
l
Unstable or damaged machine foundation
l
Mounted components strike machine foundation or machine casings or frame during
shaft rotation
l
High breakaway torque from rotatable and non-rotatable shafts
l
Coupling backlash
l
Change of rotational direction during and between measurements
l
Mounted components moved during shaft rotation
l
Uneven shaft rotation
l
Change in temperature within machines
l
External vibration from other rotating machines
Results and Live Move
l
V is the vertical orientation of the machines viewed from the side.
l
H is the horizontal orientation of the machines viewed from the top.
l
The foot results which are used in correcting misalignment are position values with
respect to the reference machine.
l
The bold colored foot tolerance arrows show the direction and magnitude in which to
move the machine. The color code also shows the attained alignment tolerance.
SHAFTALIGN touch 117
On-board help